SouthEastFPV - Designs

Welcome to my SouthEastFPV Designs Store on Armattan Productions.  You can find some of my designs here and some on www.southeastfpv.com.  My most populare frame is the Leventador Box Racing Frame.  I am making both the Sport and Pro versions available here.  Box Frames are more expensive to produce as a result of all the extra CNC/Labor involved to produce the product.. Please feel free to reach out to me if you have any questions.  I do not have the ability to give discount codes to be used when purchasing here.  If you want to join in on a pre-order hit me up on FaceBook.

I am the designer of the Knife and PyrDrone Cube Box Racing frames.  The Knife Box Frame was the first box design to be sold in the US and was sold on GetFPV, HeliNation and PyroDrone.  Based on my learnings from the Knife, I created the Pyro Cube Box frame.  Every 5" race frame that I have released to the public has been tested for a full MultiGP race season and in some cases 2 seasons.  The Leventador Box Frame is a combination of 4 years of testing and iterating over the design based on real-world experience with some the Top Racing Pilots in the World on a weekly basis.  The Leventador Box Racing frame is a proven race frame and has been the primary frame of choice for all but a few members of the Quad Racing Rivals Pro Team.

The Leventador frame fully built can acheive an AUW of 256gr - 280gr with props and lipo strap using a motor similar to the Headsup Motor and any of the common 20x20 stacks that are commonly found on a 5" race setup.  I offer two versions, the Pro which falls into the weight range I just mentioned or the Sport version which is built to be near industructible using 3mm, 2.5mm 2mm CF parts.

Kind regards,

Rick

 

Free Fly Acro Frame/Kit


Description

This is the complete frame kit for the Free Fly 5" Acro Frame.  The main body is a uni-body with a 220 MTM cut from 4mm of Armattan Carbon Fiber.  This design leverages a spread X configuration which provides more room for the FPV camera and lots of room for VTX/RX with great camera protection.  The FPV Camera protection is deisnged so it can be easily replaced if broken. It also has addition 2mm of protection for a total of 4mm Camera protection with the Camera reenforcement plates.  You do not have to use the Camera reenforcement plates but if you want more protection you should use it.  The design also uses 4 30mm standoffs to provide a ton of side rigidity.  The design also leverages a 20mm standoff height to allow for a low CG for a top mount battery.  This is a great frame for the price especially if you compare it to the other top acro frames on the market.

 

Spare parts can be puchased from these links:

Spare Main Body

Spare Top Plate

Spare FPV Camera Plate

Spare FPV Camera Reenforment

 

 

Review Section ( Total Review:0 )

No Review Found

Related Products