Toothpick frame for the Betafpv Meteor 75 Pro II O4 Wide, as shown in Rimzler video https://youtu.be/nDgA4bD6Dak

You will need screws and nuts to mount the flight controller to the new frame, clearance between the canopy and fc is very slim and sometimes they can souch, resulting in gyro shakes in the dji vtx, you can disable stabilization or use longer silicon dampeners, i am working on a modified canopy, you will also need to come up with a way of securing the battery on the bottom, i used velcro strap and works very good, but again touches the fc and can transmit vibrations, even if the drone was flying good in my test

Keep in mind the design is not perfect, i'm posting it because i received a ton of requests, i will eventually improve it and make it much better