1. Home
  2. Shop
  3. Richard- Gallery
  4. DYS Elf modified frame parts

DYS Elf modified frame parts

Image

Carbon fibre parts to modify the DYS Elf quadcopter

  • product
    $ 11.00

    DYS Elf 98mm modified frame in 3mm CF

    This frame will allow for fitting 2" props to the Dys Elf micro quad while retaining the stock electronics.

    I also have a CF top plate available which works nicely with the pictured 3d printed canopy and stock CMOS cam or with side plates (soon to be uploaded) for a micro CCD cam.

  • product
    $ 4.00

    DYS Elf top plate in 2mm CF

    Carbon fibre top plate for the DYS Elf micro quad.  Matches nicely with my 98mm frame for a 2" elf on stock electronics.  Works nicely with my 3d printed CMOS cam canopy (on thingiverse here : https://www.thingiverse.com/thing:2496691) or CF side plates for micro CCD cam mount (coming soon!).

    This top plate also matches my elf128 frame so you can go completely bonkers and make a 3" capable elf!  

    Requires 2mm screws and standoffs to complete! 

    I used from bottom to top :

    5 x m2 x 12mm long countersunk screws through the bottom frame to hold the bottom standoffs on 

    5 x m2 3.5mm long nylon standoffs on the bottom (up to 5mm will be ok)

    Fit the fc preferably with originial rubber grommets.

    5 x m2 8mm long nylon standoffs on top of the fc

    Fit the Top plate

    Fit the 3d printed canopy

    Screw down with 5 x m2 x 6mm long screws

     

    Enjoy! 

  • product
    $ 17.60

    UNTESTED Elf128 3mm CF frame to suit DYS Elf electronics with 3mm wide arms

    Frame to suit the Dys Elf micro quad electronics and 3" props.  Works well with my 2mm top plate and 2mm micro cam side plates for a micro CCD cam mount or just the top plate and my 3d printed CMOS cam mount.   I would recommend 6500kv dys be1104 motors on this one.  Has 3mm wide arms

  • product
    $ 2.50

    DYS Elf Micro cam side plate in 2mm CF to suit 2mm CF top plate

    Side plates to suit mounting a micro CCD cam on my 2mm top plate for the DYS Elf micro quad.

    *** Currently untested ***  for clearance with top plate until first prototypes arrive, so may need filing or not!

  • product
    $ 17.60

    UNTESTED Elf128 in 3mm CF frame to suit DYS Elf electronics with 5mm wide arms

    Frame to suit the Dys Elf micro quad electronics and 3" props.  Had 5mm wide arms.

    Works well with my 2mm top plate and 2mm micro cam side plates for a micro CCD cam mount or just the top plate and my 3d printed CMOS cam mount.   I would recommend 6500kv dys be1104 motors on this one.

  • product
    $ 3.00

    Elf top plate in 1mm CF

    Carbon fibre top plate for the DYS Elf micro quad.  Matches nicely with my 98mm frame for a 2" elf on stock electronics.  Works well with my 3d printed CMOS cam canopy (on thingiverse here : https://www.thingiverse.com/thing:2496691).

    This top plate also matches my elf128 frame so you can go completely bonkers and make a 3" capable elf!  

    Requires 2mm screws and standoffs to complete! 

    I used from bottom to top :

    5 x m2 x 12mm long countersunk screws through the bottom frame to hold the bottom standoffs on 

    5 x m2 3.5mm long nylon standoffs on the bottom (up to 5mm will be ok)

    Fit the fc preferably with originial rubber grommets.

    5 x m2 8mm long nylon standoffs on top of the fc

    Fit the Top plate

    Fit the 3d printed canopy

    Screw down with 5 x m2 x 6mm long screws

     

    Enjoy! 

  • product
    $ 8.50

    Elf98 v3 in 2mm CF

    This frame will allow for fitting 2" props to the Dys Elf micro quad while retaining the stock electronics.

    I also have a CF top plate available which works nicely with the pictured 3d printed canopy and stock CMOS cam or with side plates (soon to be uploaded) for a micro CCD cam.

    Versions :

    V2 has more material around where the x-arm attatches to the motor disc.