Foggy Designs
FOGGY MK2 - True-X 5IN RACING FRAME
Item List
-
MK1 Bottom Plate --2mm-- v1.1
Quantity :1
-
MK1-MK2 X-Plate --2mm-- v1.1
Quantity :1
-
MK2 Inner Vertical plate --1.5mm-- v1
Quantity :2
-
MK2 Outer Vertical plate --2mm-- v.1
Quantity :2
-
MK2 Rear Plate --3mm-- v.1
Quantity :1
-
MK2 FRONT PLATE --3MM-- V.1.2
Quantity :1
-
MK1-MK2 5INCH ARM --5MM-- V1.6
Quantity :4
-
30mm M3 F/F Alumi Tapped Stepped Standoff Black Anodized 6.3mm O.D.
Quantity :3
-
6mm M3 Steel Button Head Bolt Black Anodized
Quantity :8
-
11mm M3 Steel Button Head Bolt Black Anodized
Quantity :2
-
M3 Stainless Steel Sunk Nuts (per piece)
Quantity :6
-
14mm M3 Steel Button Head Bolt Black Anodized
Quantity :4
-
5mm M2 Steel Cap Head Bolt Black Anodized (per piece)
Quantity :2
-
20mm M3 Steel Button Head Bolt Black Anodized
Quantity :2
-
M3 Nylon Insert Nut Black Anodized (Nylock)
Quantity :4
-
22mm M3 F/F Alumi Tapped Stepped Standoff 5.5mm O.D.
Quantity :1
Description
ABOUT THE FRAME
CARBON
Inner vertical Plate: 1.5mm
Outer vertical Plate Plate: 2.0 mm
Front Plate 3.0 mm
Back Plate 3.0 mm
Bottom Plate 2.0 mm
Arms v1.3 (light): 5.0 mm
X Plate: 2.0 mm
HARDWARE
8pcs M3x6mm steel button head screws
2pcs M3x10mm steel button head screws
4pcs M3x14mm steel button head screws
2pcs M3x20mm steel button head screws
6pcs M3 sunk steel button head nuts
4pcs M3 nuts
1pcs M3x21.5mm standoff
3pcs M3x30mm standoff
Thigiverse collection for 3D printed parts: https://www.thingiverse.com/gianniceccanti/collections/foggy-mk2-parts
Facebook page for more contents: https://www.facebook.com/FoggyDesign
HOW TO BUILD VIDEOS
Assembly by Foggy ( https://youtu.be/taBr6ADlddA ) :
Review Section ( Total Review:0 )
No Review Found
